Flare Lead Flange Adaptor
$91.32 – $204.44
Red Hed takes the hassle out of lead service replacement. Custom made lead flange adaptors let you use existing corporations and eliminate the need for retapping or line shutdown. Red Hed lead flange adaptors are manufactured from lead-free bismuth brass CDA No. C89833 and are hydrostatically tested to 300 psi.
NOTE: For use on soft copper K tubing and CTS plastic tubing when using proper CTS flaring tools. Stainless steel insert stiffeners are required for use with plastic tubing (CTS) (compression ends only).
- Additional information
- Available Sizes
- Features
Additional information
| Inlet Female Thread Size | 5/8” = 11-1/16″, MS = 1-27/32″, RH = 2-1/8″, RHO = 2-5/32″ |
|---|---|
| Outlet | 1” Compression, 3/4” Compression |
| Thread | 12 |
| Product Number | Inlet Female Thread Size | Outlet | Thread |
|---|---|---|---|
| RH45001 5/8″ Lead Size | 5/8” = 11-1/16″ | 3/4” Flare | 12 |
| RH45002 5/8″ Lead Size | 5/8” = 11-1/16″ | 1” Flare | 12 |
| RH45021 MS Size | MS = 1-27/32″ | 3/4” Flare | 12 |
| RH45022 MS Size | MS = 1-27/32″ | 1” Flare | 12 |
| RH45041 Red Hed Size | RH = 2-1/8″ | 3/4” Flare | 12 |
| RH45042 Red Hed Size | RH = 2-1/8″ | 1” Flare | 12 |
| RH45061 Red Hed Oversize | RHO = 2-5/32″ | 3/4” Flare | 12 |
| RH45062 Red Hed Oversize | RHO = 2-5/32″ | 1” Flare | 12 |
- Manufactured to ANSI/AWWA C800 Standards
- Easy to install flare or compression ends (industry standard)
- Use existing corporation stops
- Adapts to copper or plastic
- Custom made for your needs, including copper service threads or Red Hed Gripp™ connection
- Over 200 variations available
- Adapts from .” to 2″ lead service
- All components of the valve manufactured from Lead-Free Brass, Casting Stamped “LF”
- All Cast components poured and manufactured in the USA.
